S47 Series Helical Gearbox Right Angle Worm Transmission Gearbox With High Overload Bearing Capacity
S47 Series Helical Gearbox Right Angle Worm Transmission Gearbox With High Overload Bearing Capacity is specifically designed to handle high loads, ensuring reliable performance even under demanding conditions.
It can be mounted in horizontal (foot mounted) or vertical (flange mounted) positions, providing flexibility for installation in different setups.
Technical Data Sheet of S47 Series Helical Gearbox Right Angle Worm Transmission Gearbox With High Overload Bearing Capacity
- Size: S37~S97
- Technical Data(N·m): 90~4000
- Gear Ratio: 6.8~286.4(imax:26688)
- Input Power(kW):0.12~22
Model of S47 Series Helical Gearbox Right Angle Worm Transmission Gearbox With High Overload Bearing Capacity
| Solid shaft output type | S37 reducer, S47 reducer, S57 reducer, S67 reducer, S77 reducer, S87 reducer, S97 reducer |
| Solid shaft with flange output type | SF37 reducer, SF47 reducer, SF57 reducer, SF67 reducer, SF77 reducer, SF87 reducer, SF97 reducer |
| Hollow shaft output type | SA37 reducer, SA47 reducer, SA57 reducer, SA67 reducer, SA77 reducer, SA87 reducer, SA97 reducer |
| Hollow shaft with flange output type | SAF37 reducer, SAF47 reducer, SAF57 reducer, SAF67 reducer, SAF77 reducer, SAF87 reducer, SAF97 reducer |
Material of S37 Helical Worm Speed Reducer Helical Gearbox
-
Gears manufactured from certified steel, heat treated to a case hardness of HRC 58-62 with long gear life
-
Finished ground or shaved gear teeth to assure maximum mechanical efficiency, low noise, and heat generation
-
High-capacity anti-friction bearings for optimum load-carrying capacity and long life
-
Gearcases are made of high-strength, gray cast iron, SAE Class 30; R27 and smaller are made of high-strength, pressure-cast aluminum
-
High cross-section modulus design, with the center wall for maximum rigidity
-
Center-tapped holes on output shafts
-
Double output seal design consisting of patented bi-helix inner seal made of Viton and double-lip Nitrile (Buna-N) outer seal*
-
Foot or flange mounts, foot/flange mounts are available in selected sizes
-
Suitable for mounting in any position
-
Available as a gearmotor or a gear brake motor
| Type | S Series Parallel Shaft Helical Gearbox |
| Model | S37-S97 |
| Mounting Position | Flange, hollow shaft, solid shaft |
| Efficiency | 94%~98%(depends on the transmission stage) |
| Material | Housing: HT250 high-strength cast iron |
| Worm shaft: 20CrMn Ti |
| Input/output shaft material | 40Cr |
| Warranty | 1 Year |
| Input Power | 0.09kw,0.18kw,1.1KW,1.5KW,2.2KW,3KW,4KW,5.5KW,7.5KW, 11Kw and so on. |
| Usages | Industrial Machine: Food Stuff, Ceramics, CHEMICAL, Packing, Dyeing, Woodworking, Glass. |
| IEC Flange | IEC standard flange |
| Lubricant oil | Worm gear oil |
Applications of S47 Series Helical Gearbox Right Angle Worm Transmission Gearbox With High Overload Bearing Capacity
1. Plastic Drum Shredding: The S Series gear motors provide the necessary torque and speed reduction for shredding tough plastic materials, such as HDPE and PP drums. Their robust design ensures efficient processing of these materials.
2. Material Handling: These gearmotors are suitable for driving conveyor systems that transport shredded materials, enhancing the overall efficiency of the recycling process.
3. Industrial Machinery: Beyond shredders, the S Series can be integrated into various types of industrial machinery, including mixers and extruders, where precise speed control and high torque are essential.
4. Agricultural Equipment: The versatility of the S Series gearmotors allows them to be used in agricultural applications, such as feed mixers and other machinery that require reliable power transmission.
5. Chemical Processing: The gearmotors are also applicable in chemical industry machinery, where they can handle the demands of mixing and processing various materials.
